Adafruit Voice Bonnet for Raspberry Pi -Two Speakers + Two Mics
Your Raspberry Pi computer is like an electronic brain - and with the Adafruit Voice Bonnet you can give it a mouth and ears as well! Featuring two microphones and two 1 Watt speaker outputs using a high quality I2S codec, this Pi add-on will work with any Raspberry Pi with a 2x20 connector - from the Pi Zero up to the Pi 4 and beyond (basically all but the very first ones made).
The on-board - so it sounds a lot better than the headphone jack on the Pi (or the no-headphone jack on a Pi Zero). We put ferrite beads and filter capacitors on every input and output to get the best possible performance, and all at a great price.
We specifically designed this bonnet for use with making machine learning projects such as DIY voice assistants - . But you could do various voice activated or voice recognition projects. With two microphones, basic voice position can be detected as well.
- On/Off privacy switch to deactivate audio so you know it can't be recording.
- Two analog microphone inputs (left and right)
- Two 1W speaker outputs
- 3.5mm stereo headphone or line-out audio
- Plugs into any Raspberry Pi with 2x20 headers
With the extra space on the PCB we also added some bonus extras!
- Push button - Use to change modes, activate the voice assistant, anything you like!
- Three DotStar RGB LEDs - add LED feedback or make a rainbow light show
- STEMMA QT connector - .
- 3 Pin JST STEMMA connector - for larger accessories, like NeoPixels, a relay or servo
No assembly required! Simply pop it onto your Pi and install the microphone/speaker card using our installer script. Your Pi will then have stereo input and output for use in any software - they appear as any other speaker/mic would. Play music or record audio with ease. For audio input, the two microphones are built into the Bonnet. For audio output, you can either use the Line-out/Headphone 3.5mm stereo jack or you can plug in one or two of our enclosed speakers. For DIY speakers, solder any 1W+ speaker to one of these JST 2-PH cables. If you'd like to stack another HAT or bonnet on top, use a 2x20 stacking header to feed through the 2x20 connector.
Product Dimensions: 65.2mm x 33.3mm x 11.0mm / 2.6" x 1.3" x 0.4"
Product Weight: 6.0g / 0.2oz
LearnGive your Raspberry Pi two microphones and speakers!This project makes use of the BrainCraft HAT to easily get Google Assistant up and running
MAY WE ALSO SUGGEST...
MAY WE ALSO SUGGEST...-
See our Distributors page for a complete list of distributors.